Ethernet or Wireless WiFi Communication Module for Xinje XC XD PLC

for Xinje XC XD PLC replace USB-XJ cable, Modbus TCP Gateway Kepware OPC

(The PLC in the pictures are NOT included.)

BCNet-XJ is an Ethernet communication processor, which is designed to meet the increasing informatization requirements of factory equipment (equipment network monitoring and production management). Network data collection is very convenient to build a production management system.

BCNet-XJ adopts a modular design and comes with a communication line. It does not occupy the PLC programming port, that is, while the programming software/host computer software monitors the PLC data through the Ethernet, the touch screen can communicate with the PLC through the multiplexing interface X2.

BCNet-XJ features

Installed on a 35mm guide rail, the COM1 port is directly connected to the MD8 programming communication round port of XJ, and a COM2 port is extended for touch screen communication. BCNet-XJ can directly obtain power from the PLC programming communication port, or external 24VDC power supply.

Integrate a WEB server, through the web page, you can set device parameters and run diagnostics, and set a login protection password to prevent tampering with configuration data.

Automatically match PLC and HMI serial parameters without additional configuration.

Realize the Ethernet communication with Xinjie programming software XCPPro, read/write the program (including the write function in RUN)/comparison through the Ethernet, and monitor the operation of the programmable controller.

It supports Xinjie Ethernet protocol communication, and can read/write device data to the programmable controller through the host computer system. After selecting the Xinjie Ethernet driver through the host computer software, it is convenient and quick to access.

Integrate ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, and the Modbus data area corresponds to the device address of Xinjie PLC.

By using ModbusTCP communication protocol or port mapping, high-level language (such as VB, VC, C#, etc.) can be used to program, realize data communication with Xinjie PLC, and facilitate the development of production management systems.

It can realize XCPPro, BCNetTCP transparent transmission, and ModbusTCP connection methods, allowing 6 PCs to collect PLC data at the same time, and the connection protocol method can be used arbitrarily.

Support firmware update on the user side through Ethernet, provide firmware with more functions for free, purchase hardware once, and upgrade permanently.