BCNet-R40 is a remote equipment maintenance terminal for the industrial field. It has 3G/4G, WiFi, wired broadband Internet access, and can establish a secure communication link between different places, providing equipment for remote maintenance and information management. secure and reliable data ..
BCNet-R20 is a remote equipment maintenance terminal for the industrial field. It has WiFi and wired broadband Internet access, and can establish a secure communication link between different places, providing a safe and reliable device for remote maintenance and information management of equipment...
BCNet-WiFi is an industrial-oriented, high-performance wireless communication module. The industrial wireless module can easily connect the serial/network port device to the WIFI wireless network to realize the wireless network upgrade of the serial/network port device. BCNet-WiFi provides serial to..
HMI-S7300(SMART screen connected to S7-300/400)Siemens SMARTLINE touch screen has a high cost performance, but can only be used to connect S7-200. HMI-S7300 can realize the method of connecting S7-300/400 Ethernet to SMARTLINE touch screen.HMI-S7300 can be directly plugged into the MPI/PROFIBUS port..
HMI-S71200(SMART screen connected to S71200/1500)Siemens SMARTLINE touch screen has a high cost performance, but can only be used to connect S7-200. HMI-S71200 is a protocol conversion gateway for Siemens PLC with Ethernet interface (S7-1200, S7-1500, S7300PN, etc.) and Siemens SMART IE touch screen..
XCNet-MB-S is a high-performance protocol conversion gateway, which can realize Siemens PLC with Ethernet interface (S7-1200/1500, S7-300PN, S7200 SMART, etc.), Siemens Ethernet module (CP243-1, CP343- 1, etc.) ModbusRTU serial communication and ModbusTCP master-slave communication. The module integ..
0.8KW 220V Air Cooled Spindle Motor with ER11 Match with CNC Engraving Milling Machine and Mach3 PWM Frequency ConvertersVoltage: 220VPower: 0.8 KWFrequency: 200-400 HzSpeed: 12000-24000 R/minRunout off: Less than 0.002 mmMaximum Torque: 0.6NMGross Weight：2.7 KG(5.95 lbs)Product Dimension: 2.6 x 8 i..
1.5KW 2.2KW 220V Air Cooled Spindle Motor with Four Bearings ER11 ER20 Collet for CNC Router Engraver Frequency ConvertersTechnical Parameters: Spec: φ2.6 x 9.4 in (Diameter: 6.5 cm x Length: 23.9 cm)/ φ3.1 x 11.8 in (Diameter: 8 cm x Length: 29.9 cm); Power: 1.5KW/2.2KW; Voltage: 220V; Current: 5A/..
3D Touch Auto Leveling Sensor probe replacement partsinstall method:Step 2: Remove the needle from the top. Step 3:Then replace the new needle and install the screws. Step 1:Please remove the screw on the top of the sensor.
Please note: The 3D touch sensor do not include in the parcel.Please be ..
12 Mbps support USB 1.5 Mbps at low speed and full speed doesn't support pure high-speed equipmentSupport USB control transfer, bulk transfer, interrupt transmission, synchronous transmission/etc...Power supply: from the USB port to the PC hostNo need install driver, it is more convenient to be used..
16DI/16RO 16-channel Digital Isolated Input and 16-channel Relay Isolated Output RS485 MODBUS Module with Network Disconnection Protection
1. Product Overview
The MBSL16DI16RO module is a 16-channel digital isolated input and 16-channel relay isolated output module, which is output through an isol..
2W 12V Multifunctional Solar Panel Charging Board Polysilicon Solar Panel with Border For Solar Charger Generator OutdoorFeature:1. High‑efficiency polysilicon solar charger, it converts sunlight into electricity, can generate electricity in any weather.2. The solar charger has many protective funct..
XHC USB Mach3 Board 3 4 Axis Motion Control Card 2MHz USB Port Support Windows 7 10 For CNC Router Machine 1 PCS x 3 Axis / 4 Axis MACH3 USB Motion Control Card Interface 2000KHz Mach 3 CNC Control Card 3 Axis 4 Axis 5 Axis XHC MKX4 MACH3 USB CNC Motion ControlFully supporting all Mach3 version..
400W AC220V Multifunctional Motor Speed Controller Motor Speed Pinpoint Controller Forward Backward Motor GovernorThis product has the soft-start function, adopts MCU digital control technology, multifunctional design, accurate speed control with stable performance. Adopt digital display menu option..
Type: 5 axis CNC breakout boardFully support of MACH3 and other computer software support for parallel port control.USB power supply and peripherals powered phase separation to protect computer security.Peripheral wide voltage input, 12-24V, and anti-reverse function.All of the input signal, all the..
110-220V 500W Air Cooled Spindle Motor With Speed Governor 52mm Clamp Power Supply Speed Governo For CNC MachineSpecification:1.Spindle Parameters: Working Voltage: 12-100V DCIdle Speed: 1000-12000/rpmPeak Power: 500WPeak Torque: 0.5NMInsulation Resistance: > 2 megohmInsulation Dielectric st..
8 Channel DC7-24V Network Relay Module with Remote Control Relay Device Ethernet to RS485 Independent Output Security RelayFeature:1. Strong anti-interference ability, can be connected to external high-current AC contactor and relay, will not crash under strong electromagnetic interference.2. The pr..