BCNet-R40 is a remote equipment maintenance terminal for the industrial field. It has 3G/4G, WiFi, wired broadband Internet access, and can establish a secure communication link between different places, providing equipment for remote maintenance and information management. secure and reliable data ..
BCNet-R20 is a remote equipment maintenance terminal for the industrial field. It has WiFi and wired broadband Internet access, and can establish a secure communication link between different places, providing a safe and reliable device for remote maintenance and information management of equipment...
BCNet-WiFi is an industrial-oriented, high-performance wireless communication module. The industrial wireless module can easily connect the serial/network port device to the WIFI wireless network to realize the wireless network upgrade of the serial/network port device. BCNet-WiFi provides serial to..
HMI-S7300(SMART screen connected to S7-300/400)Siemens SMARTLINE touch screen has a high cost performance, but can only be used to connect S7-200. HMI-S7300 can realize the method of connecting S7-300/400 Ethernet to SMARTLINE touch screen.HMI-S7300 can be directly plugged into the MPI/PROFIBUS port..
HMI-S71200(SMART screen connected to S71200/1500)Siemens SMARTLINE touch screen has a high cost performance, but can only be used to connect S7-200. HMI-S71200 is a protocol conversion gateway for Siemens PLC with Ethernet interface (S7-1200, S7-1500, S7300PN, etc.) and Siemens SMART IE touch screen..
XCNet-MB-S is a high-performance protocol conversion gateway, which can realize Siemens PLC with Ethernet interface (S7-1200/1500, S7-300PN, S7200 SMART, etc.), Siemens Ethernet module (CP243-1, CP343- 1, etc.) ModbusRTU serial communication and ModbusTCP master-slave communication. The module integ..
BCNet-MB(RTU to ModbusTCP)BCNet-MB is an economical Ethernet communication processor, which is designed to meet the increasing information requirements of factory equipment (equipment network monitoring and production management), and is used for Ethernet data acquisition (Modbus RTU/ASCII to Modbus..
ETH-4NAT(Network Coupler, 4 Channels)ETH-4NAT is suitable for all network ports PLC (TCP/UDP protocol) network communication and data acquisition, and has the functions of cross-network segment and transparent transmission. ETH-4NAT supports NAT conversion of 4 network port PLCs at the same time; i..
ETH-NAT(Network Coupler)ETH-NAT is suitable for all network ports PLC (TCP/UDP protocol) Ethernet communication and data acquisition, also known as network segment coupler, IP address converter, and has the functions of cross-network segment and transparent transmission.If the IP address of the netw..
Ethernet Module for Mitsubishi FX PLC ProgrammingETH-FX is an economical version of BCNet-FX, which can expand the RS422 programming round port of Mitsubishi FX3U/FX3G/FX3S series PLC into two RS422 programming round ports and one Ethernet port. The extended round port can be connected to the touch ..
XHC USB Mach3 Board 3 4 Axis Motion Control Card 2MHz USB Port Support Windows 7 10 For CNC Router Machine 1 PCS x 3 Axis / 4 Axis MACH3 USB Motion Control Card Interface 2000KHzMach 3 CNC Control Card 3 Axis 4 Axis 5 Axis XHC MKX4 MACH3 USB CNC Motion ControlFully supporting all Mach3 versionsFull ..
XHC 4 Axis / 6 Axis MACH3 USB CNC Handwheel MPG Manual USB wire cable 5 meters for lathe and turning center CNC Engrave machineEncoder： 100PPR USB cable：5 MetersButton：16 (10 custom buttons)Display：Dot matrix LCD backlit displayMaximum number of axes: 4 Axis / 6 AxisMaterial: ABS and PC materia..
XHC WHB03B Nc Studio 3 Axis Wireless Handwheel MPG Pendant Remote Handle Compatible To Weihong V5 V8 For EngravingApplicationsFor NC studio CNC system, such as NC studio 5.4.49/8.202/8.324/8.527, etc.1.Auto Frequency Hopping When Noise.Frequency band:433Mhz,ISM ,the output power up to10DB，High recei..
XHC Ethernet Mach3 breakout board 3 4 6 axis motion control card resume 2MHz support windows 7 10 for cnc enrgaver Lathe machine·Fully supporting all Mach3 versions， support Windows PC.·Only support Ethernet interface, Need to set IP address.·Support save data when power off·Support spindle speed fe..
XHC Mach3 USB Breakout Board 3 4 6 Axis MKX-V 5-generation USB Motion Control Card 2MHz Support Windows 7,10·Fully supporting all Mach3 versions·Support save data when power off·Support spindle speed feedback·Support 3 meter USB cable·Supports Up 6-Axis·Maximum step-Pulse frequency is 2000KHz Status..