Ethernet Relay Wifi Switch 2 4 8 Channel
- Stock: In Stock
- Model: 2255800812755068
- SKU: 2255800812755068
Ethernet Relay Network Wifi Switch Modbus MQTT TCP UDP Web HTTP Schedule Task CAN RS485 CoAP Domoticz Timer Module
Default support Ethernet and WIFIUser manual and programming manual
Support Domoticz
Support multiple interface RJ45/RS485/CAN/WIFI
Support HTTP GET CGI(Ethernet)/UDP/TCP Server/TCP Client
10/100Mbps ethernet, Auto-MDIX,DHCP ip,Static IP
Local Button control
PC software config and control
WEB config and control
Support password
Support MQTT/Modbus/CoAP
Features:
Support multiple channel relay, On/Off/Delay/Momentary.
Relay Size:
2 relay:
PCB: 87 x 68 mm
Distance of hole: 80 x 60 mm
Diameter of hole: 3.5 mm
4 relay:
PCB: 91.6 x 86.4 mm
Distance of hole: 85.3 x 80 mm
Diameter of hole: 3.5 mm
8 relay:
PCB: 122 x 87 mm
Distance of hole: 115 x 80 mm
Diameter of hole: 3.5 mm
Because of different chip, there is 2versions shipped in random, the function and size is the same , thanks
This is a finished board, not a study board, which cannot support flash by yourself, if you need to flash your firmware, please contact us before order.
Version 1: there is no STM32 chip, it has N32G457VCL7 or AT32F407VCT7 chipin random
Multiple Interface
RJ45
10/100Mbps ethernet, Auto-MDIX,DHCP ip,Static IP
CAN bus
5/10/25/50/100/125/200/250/500/800/888/1000Kbps
RS485
1200/2400/4800/9600/19200/34800/57600/115200bps
WIFI
150Mbps
FAQ
Q: What is the ethernet and WIFI address?
A: Ethernet IP: 192.168.1.100
WIFI: 192.168.7.1
WIFI SSID: dtrelaySN
WIFI PASSWORD: dtpassword
Q:Saves relay status after power off/on on board?
A:Yes, it can save the status
Q: RS485: protocol modbus/BACnet ?
A: Yes, support Modbus
Q:Support url relay commands?
A:Yes, it support HTTP GET CGI API
