Menu
Your Cart
Corporate users can contact our email to provide special prices.

Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP

Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP
Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP
Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP
Free Shipping
Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP
Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP
Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP
Ethernet Communication Module for Mitsubishi FX PLC Programming FX3U-ENET-ADP
$185.00
  • Stock: In Stock
  • Model: 2251832794367608
  • Weight: 0.30kg
  • SKU: 2251832794367608
Customer Service Guarantee
90-Day Buyer Protection Money back guarantee

Ethernet Module for Mitsubishi FX PLC Programming for fx3u-enet-adp USB-SC09-FX, Modbus TCP FX1N 1S 2N 3S 3G 3GC 3U

Note:The  PLC in the pictures are NOT included.   Net-FX-S is optional WiFi model.

BCNet-FX is an economical Ethernet communication processor, designed to meet the increasing informatization needs of factory equipment (equipment network monitoring and production management), for Mitsubishi FX1S/1N/2N/3S/3G/ 3GA/3GC/3U/3UC series PLC Ethernet data acquisition is very convenient to build a production management system.
BCNet-FX adopts industrial grade design, rail installation, with communication line. It does not occupy the PLC programming port. While the host computer monitors the PLC data through the Ethernet, the touch screen can communicate with the PLC through the multiplexing interface X2. BCNet-FX supports the vast majority of SCADA software in the field of industrial control, and supports two communication methods: Mitsubishi MC Ethernet protocol and ModbusTCP.

BCNet-FX Features

Installed on a 35mm guide rail, no external power supply required. The COM1 port is connected to the S8 programming communication port of FX, and the COM2 expansion port is used for touch screen communication.
Through the WEB server or the configuration diagnostic tool BCDevice, the device can be parameterized and run diagnostics.
Automatically adjust the baud rate of the FX programming communication port, which can meet the needs of large data communication.
Support Ethernet communication of MELSOFT products (GX Works2, GX Developer, etc.).
Support host computer MC Ethernet protocol (MELSEC Communication Protocol) communication, support host software (MCGS, IFIX, INTOUCH, KepWare OPC server, etc.) access.
Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area is automatically mapped to FX data area.
Support TCP/IP transparent transmission protocol communication.
With MC communication protocol, programming in high-level languages ​​(such as VB, VC, C#, etc.) can be realized, and data communication with Mitsubishi FX can be realized, which is convenient for the development of production management system.
The SCADA (upper configuration software) supporting OPC channel communicates with FX in OPC mode.
MELSOFT connection, MC protocol connection and ModbusTCP connection can be realized at the same time. Support the connection of 6 host computers.
Support firmware update on the user side through Ethernet, one purchase, permanent upgrade.

Product numberBCNet-FX
DescribeMitsubishi FX series PLC Ethernet communication processor
ColorMetallic Black
Status DisplayPwr,COM1,COM2,Link
Ethernet interface
Interface Type
Transmission rate
Protocol support
IEEE 802.3 compatible, Link/Active indicator, line sequence adaptive, support Auto-MDIX
RJ45 female socket
10/100Mbps
MELSOFT, MC, Modbus TCP, etc.
Number of TCP connections6
X1 interface (connected to PLC)
Interface Type
Transmission rate
Protocol support
RS422
MD8 communication female port
9.6K, 19.2K, 38.4K, 115.2Kbps
FX programming port
X2 interface (with HMI)
Interface Type
Transmission rate
Protocol support
RS422
MD8 communication female port
9.6K, 19.2K, 38.4K, 115.2Kbps
FX programming port
Programming software
Configuration Software
OPC software
GX Works2
Kingview, 3D Force Control, etc.
KepWare OPC
Diagnostics and Parameter settingIE browser, default 192.168.1.178, BCDevice
Power supply
Voltage type
FX communication port to take power directly (communication cable) or external 24VDC
24VDC/100mA
Operating temperature0~60℃
Working humidity90% non-condensing
Installation method35mm rail installation
Electromagnetic Compatibility2014/30/EU
Anti-vibration4.5mm/30Hz/10Min
ESD6KV
Factory agingThe 60-degree aging box runs for 168 hours, and the power is turned on and off 500 million times
Communication stabilityContinuous communication with PLC for 30 days, 130 million times of communication with 0 errors
CertificationCE Certification
Dimensions (LWH)90*24*65mm
Weight100g

Write a review

Note: HTML is not translated!
Bad Good

At Our Store, we accept all major credit cards and payments made through PayPal.

In addition, we support EUR, GBP, JPY, AED, CAD, AUD, SGD, you can use local currency to pay to the local receiving account. (contact support@wiseck.com sent you bill)

Standard Shipping 15-23 business days((Free Shipping)
Express Shipping 7-15 business days (contact support@wiseck.com sent you bill)

Corporate users can contact our email to provide special prices.
More Delivery Information

Tags: BCNet